85
Making Connections
You can connect your camera to: Computer or a printer.
Connecting the Camera to a PC
You can transfer images and
video files to your PC.
1. Connect one end of the USB
cable to an available USB
port on your computer
2. Connect the other end of the
USB cable to the USB
terminal on the camera.
3. Turn on the camera.
4. The PC starts to detect the connection
while the LCD monitor appears
Connecting…
5. Connection established and the LCD monitor will be turned off.
6. Access the files in the camera by your PC.
When this camera is connected to your PC, a device name as "Digital
Camera" will be displayed. There are 2 disks named "Image" and
"MAGIX" under "Digital Camera". The disk "Image" indicates current
used memory (SD Card or Internal Memory). Please click AP link
(Magix) in the disk named "MAGIX", and then Setup window will
dispaly (an Internet connection is required). After installation, you can
import/edit your photos, movies and music. Please note that AP link
(Magix) is the trial version and will be used permanently after
registration.
To Next Page
Loading...
