Minolta MN22Z - Startup Image and DPOF Settings

69
Startup Image
You can specify the startup image from the captured images for camera.
1. Press the MENU button to launch the
Playback menu.
2. Select Startup Image. The menu
selection appears.
3. Select options:
• System. Use camera default image.
• My Photo. Use the or keys to
scroll and select desired image.
• Off. Disable the startup image.
4. Press the OK button to apply changes.
The startup image will still be displayed startup even if the selected
image was deleted.
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to
embed printing information on your memory card. You can select the images to
be printed and how many prints to make with the DPOF menu in the camera
and insert the memory card to the card compatible printer. When the printer
starts printing, it will read the embedded information on the memory card and
print the specified images.
To set DPOF:
1. Press the Playback button on the
camera.
2. Press Menu button to launch the Playback
Menu.
3. Select DPOF. The submenu appears.
Available settings are as follows:
• Select Images. Mark images in the
memory card.
• Reset. Reset all DPOF settings to initial
default settings.