Minolta MS 6000 - Setting the Number of Prints to be Made; To Entry the Number of Prints; Correcting Entry

2-24
Scanner Chapter 2
12. Setting the Number of Prints to be Made
To Entry the Number of Prints
Set the desired number using the Multi-Print Key.
NOTE
This function is only available on the PR mode.
The number that can be entered is 19 max.
Correcting Entry
To correct an entry, depress the Clean Button, which resets the number on the Multi-Print Dis-
play to “1”.
0820771003.book Page 24 Monday, March 19, 2001 2:49 PM