2. Troubleshooting and Maintenance
3-7
MSP 3000 Printer
Chapter 3
Replacing the Toner Cartridge
Open the upper unit by pulling the
Upper Unit Lock Release Lever
forward.
Remove the old Imaging Cartridge
from the printer.
Take a new Imaging Cartridge out of
the box. Holding it with both hands,
shake it well in the directions
indicated by the arrows.
Remove the seal from the Imaging
Cartridge by pulling it steadily
straight out.
Shake the Imaging Cartridge four or
five more times as shown to evenly
distribute the toner inside.
Slide the pins located on both sides of
the Imaging Cartridge into the
grooves of the printer as shown and
gently push the Imaging Cartridge
securely into place.
1
2
3
0820771003.book Page 7 Monday, March 19, 2001 2:49 PM
To Next Page
Loading...
