4-38
Using the PagePro 1100 Printer Driver Setup Dialog
Chapter 4Printer Driver
Device Option
This tab shows auxiliary accessories that are available for installation
on the printer.
Input Option
Check
Tray2
box when you have Tray2 installed on your printer. This
causes
Tray2
to be added to the
Paper Source
box on the
Paper
tab. It
also changes the graphic on the left side of the
Device Option
tab so it
shows the second tray.
Memory Option
Use this box to specify the printer’s total memory capacity (prein-
stalled memory plus any additional memory). You can type in a value
or use the arrow buttons to change the setting.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
