3-2
Using the Panel Button
Chapter 3Using the Printer
Job Cancel
Use the following procedure whenever you want to cancel the current
job.
1
Hold down the panel button for more than 5 seconds.
2
After all the indicators are lit, release the panel button to cancel
the print job.
Print Configuration Page
Use the following procedure whenever you want to configuration for
printer.
■ Press the panel button while printer is idle without any errors and
job requests. See “Testing the Printer” on page 2-15 for details.
Form Feed
Use the following procedure to resume printing after an error occurs
dues to any one of the following causes.
• Print job is too complex.
• Memory overflow
• Almost out of paper
• Wrong size paper was fed into the printer.
■ Press the panel button to perform a form feed.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
