7-11
Chapter 7Troubleshooting
Print Quality Problems
Printout too light The Toner Den-
sity setting of
the printer driver
may be too light,
or the Toner
Save setting is
set to On.
Change the setting and try
printing again.
The toner car-
tridge may be
running out of
toner.
Remove the toner cartridge
and rock it left and right a few
times to distribute remaining
toner.
If the problem persists,
replace the toner cartridge.
See “To Replace the Toner
Cartridge” on page 6-1 for
details.
The toner car-
tridge may be
defective.
Remove the toner cartridge
and check it for damage.
Replace the toner cartridge if
necessary. See “To Replace
the Toner Cartridge” on page
6-1 for details.
Printout too
dark
The toner car-
tridge may be
defective.
Remove the toner cartridge
and check it for damage.
Replace the toner cartridge if
necessary. See “To Replace
the Toner Cartridge” on page
6-1 for details.
The Toner Den-
sity setting of
the printer driver
may be too
dark.
Change the setting and try
printing again.
Symptom Cause Remedy
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
