2-26
Options
Chapter 2Setting-Up
7
Replace the side cover using the two screws provided to secure
it in place.
8
Print a configuration page “Testing the Printer” on page 2-15
and check to confirm that the “Total Memory” item correctly
shows the increase in memory capacity. If it does not, repeat the
above steps making sure that the expansion memory is installed
correctly.
Note
◆
Once the
expansion memory
has been installed, be sure to reset
the Printer Memory Setting to reflect the new memory capacity.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
