3-9
Chapter 3Using the Printer
Loading Paper
Note
◆ A maximum level mark on the paper guide shows how high you
can stack paper on Tray1. Make sure that paper is stacked no
higher than this mark.
◆ Do not load additional paper until the paper currently loaded onto
Tray1 is completely used.
◆ Never load paper while the printer is performing a reset operation.
See “Counter Reset Mode” on page 3-1 for details.
◆ Pull out the paper support in Tray1 when printing on Legal size
paper.
Paper support
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
