3-15
Chapter 3Using the Printer
Loading Paper
4
Place a stack of up to 500 sheets of paper into Tray2 so that the
side that was facing up when the paper was unwrapped is still
facing up.
Note
◆
A
maximum level mark
inside the inlet of
Tray2
shows how
high you can stack paper on
Tray2
. Make sure that paper is
stacked no higher than this mark.
◆
Tray2
does not support landscape oriented paper feeding.
◆
Do not load additional paper until all the paper currently on
Tray2
is completely used up.
Maximum level mark
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
