Minolta pmn - Setting the Brightness of the Lcd Monitor

- 103 -
SETTING THE BRIGHTNESS OF THE LCD MONITOR
Set the brightness of the LCD monitor.
This setting is applicable for both REC mode and PLAY mode.
Turn the Function dial to SETUP.
Move the lens cover slide to to
open the lens cover.
Or, move the lens cover slide to
, then press and hold the
display/ENTER button for about
1 second.
• The Setup mode menus will appear.
Press the or button to
highlight “LCD BRIGHT”.
Continued on Next Page
Press the display/ENTER button.
• The currently set brightness will be
highlighted.