BUILT-IN FLASH - CONT’D
- 34 -
FLASH RANGE
To ensure proper exposure, make sure your subject is positioned within the flash
range.
ISO - Normal setting 0.6m - 2.2m (1.97 ft. - 7.2 ft.)
ISO - High setting 0.6m - 4.4m (1.97 ft. - 14.4 ft.)
See page 62 for detail about ISO sensitivity changing.
CHANGING THE FLASH MODE
In REC mode, press the flash-
mode/delete button.
• The currently set flash mode appears on the
data panel.
Press the or button until
the desired indicator is displayed
in the data panel.
To Next Page
Loading...
