23
Adjusting the signal strength
The remote control works by emitting a high-frequency
audio signal. This signal may be heard by some people.
Two signal strength levels of the control signal are available.
By default, the remote control uses the strongest setting to
ensure a reliable connection with your hearing aids. A lower
signal strength can be chosen if the control signal disturbs
others. Be aware that this can affect the reliability of the
connection.
To adjust the signal strength:
XLock the remote control (red color visible).
XHold down the button on the remote control while
switching the key lock to the unlock position (green color
visible).
G43015_USRB_C GO Remote User Manual.indd 23 2/12/20 12:56 PM
To Next Page
Loading...
