24
Assembly of Centerline
Collapsible Pilot Chute
Pass the large loop at the end of the bridle through the
canopy bridle attachment loop! then pass the entire
assembly! starting with the pilot chute handle through
the loop in the bridle" [Fig" #]
Cinch tight [Fig" $]
If these instructions are at all unclear or you have any
questions! CONSULT A RIGGER"
IMPORTANT
:
In
order
for
the
collapsing
pilot
chute
to
work
properly!
it
must
be
cocked
before
every
jump"
Failure to cock the pilot chute may result in a major
malfunction" To cock the pilot chute! pull the pilot
chute handle while holding the bridle or stepping on
the packed main bag! in order to extract the collapse
line from the bridle" When it is safe to use! the bridle
will be colored in the window near the pin! not white"
Check that the collapse line shows color during a pin
check prior to every jump" If in doubt ASK A RIGGER"
Fig" #
Fig" $
Fig" %
MIRAGE SYSTEMS
To Next Page