MIRAGE SYSTEMS G4 - Assembly of Standard Pilot Chute; Feeding Bridle Through Main Bag Grommet; Passing Bridle Through Canopy Attachment Loop; Cinching Bridle Tight

25
Assembly of Standard Pilot Chute
Feed the large loop of the bridle through the grommet
in the top of the main bag from the outside in! [Fig! "]
Pass the large loop at the end of the bridle through the
canopy bridle attachment loop# then pass the entire
assembly# starting with the pilot chute handle through
the large loop in the bridle! [Fig! $]
Cinch tight! [Fig! %]
Fig! "
Fig! $
Fig! %
MIRAGE SYSTEMS