15
The RSL System
The R
eserve Static Line System (RSL) is optional equipment on the Mirage ha
rness/container! If it is
not installed on your Mirage" you do not need to read this section! If you would like to have the RSL
installed on your Mirage" you may contact Mirage Systems at the address on the back of this man
ual!
To properly use a system equipped with an RSL" you must be familiar with its asse
mbly" operation and
function! You must also receive training from competent instructors prior to using such a system! It is
not the intention of this manual to provide such training!
FUNCTION
The RSL system consists of a lanyard between the left main riser and the reserve ripcord! It is designed
to use the mechanical force of the released main risers after a cutaway to pull the reserve ripcord pin!
It is not guaranteed to function properly and should not be relied on to activate your reserve!
OPERATION
The RSL is essentially a passive system! A release lanyard is provided to disconnect the system!
Use and
operation of the system should be explained by competent instructors!
Mate #/$” hook Velcro on the RSL lanyard to the %” pile
Velcro on the back of the left rear reserve riser! [Fig! %]
Mate %/&” x % %/&” hook and pile Velcro on the RSL lan'
yard" forming a fold! [Fig!&]
Assembly of the RSL
Fig! %
Fig! &
MIRAGE SYSTEMS
To Next Page