EasyManua.ls Logo

MIRAGE SYSTEMS G4 - Placing Canopy onto Freebag; Closing the Freebag Mouth Lock; Stowing Remaining Lines

MIRAGE SYSTEMS G4
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Insert all but ! inches ("# cm) of the remaining lines
into the line stow pocket in a S fold manner$ starting at
the very bottom of the pocket after stowing the lines%
[Fig% "&]
Helpful Hint: Remember to remove the pile velcro tabs
and mate the velcro in the pocket% Make sure not to trap
any lines in between the velcro halves% To reduce line
bulk$ distribute the lines evenly throughout the line
pocket%
Reach inside mouth lock with hands and separate reserve
fabric to make room for Cypres%
Packing the Reserve Container
Place canopy onto the freebag%
After placing canopy on the bag work one side at a
time into the freebag% [Fig% "']
Important:
Fill the top of the bag as full as possible%
This is critical to the apearance f te packjob
Close the freebag mouth lock using the safety stow%
[Fig% "(]
Helpful Hint: Microline lock stows should be ) inches
(' cm)$ Dacron line lock stows may require up to * inch+
es (, cm)%
Fig% "'
Fig% "(
Fig% "&
MIRAGE SYSTEMS
TOP