51
System Requirements & Installation
This section details the requirements that must be met prior to installing or upgrading the
Kaleido-X software, and describes how to upgrade (or downgrade) a multiviewer system.
Software and Firmware Versions
Kaleido-X version 6.71 includes the following:
System Requirements
Client Platform
The client PC or laptop must meet the following system requirements:
Component Compatibility
Kaleido-X version 6.71 is compatible with the following Miranda components:
Software/Firmware Component Version
Kaleido-X software 6.71
XEdit application 6.71
Kaleido-RCP2 164
Processor P4 2 GHz
Memory 2 GB RAM
Operating system Windows XP Professional, or Windows 7
Java Runtime Environment JRE version 1.6.0 update 20 (32-bit
a
)
a.Running a 64-bit JVM is not supported.
Product Minimum version Recommended version
Densité CPU-ETH2 enhanced
Ethernet controller
2.0.4 2.0.4 or later
iControl 3.60 4.30 or later
RCP-200 remote control panel 1.40 if the RCP-200 is configured
within an iControl system; 1.70 if the
RCP-200 is used to control the
multiviewer directly
1.70 or later
To Next Page
Loading...
