Need help?Do you have a question about the Miranda Kaleido-X and is the answer not in the manual?
General| Category | Multi-Display Processor |
|---|---|
| Manufacturer | Miranda Technologies |
| Input Support | SD/HD/3G-SDI, optional analog composite |
| Output Support | SD/HD/3G-SDI |
| Multi-format Support | Yes |
| Alarm Management | Yes |
| Remote Control | Yes, via Ethernet/IP network control |
| Multi-view Layouts | User-definable layouts |
| Integration | Yes, integrates with automation systems and other broadcast equipment |
Details the process of importing a database from a multiviewer into XEdit's local workspace.
Guides on adjusting brightness and contrast parameters to optimize image presentation on the monitor wall.
Guides on configuring thresholds for video and audio alarms, including black detection and freeze sensitivity.
Explains how to create and configure logical sources, including automatic and manual addition.
Provides instructions for creating a new room, adding displays, and configuring zones.
Explains how to configure display attributes like resolution, aspect ratio, and position to match physical counterparts.
Details the process of creating a room layout by adding monitors and assigning logical sources.
Explains how to configure video monitors, including resizing, aspect ratio, and alarm reporting.
Details how to assign and trigger monitor wall actions associated with specific monitors or layouts.
Explains how to create background actions triggered by alarms or Gateway commands.
Provides instructions on how to add new RCP users to the system via XEdit.
Details how to grant and remove RCP user access to specific rooms within the multiviewer system.
Guides on how to change the user name and password for an RCP user within XEdit.
Explains the process of creating and configuring an external router for use with the Kaleido-X system.
Guides on importing router configurations from an NV9000 system controller into XEdit.
Provides a step-by-step guide to configuring an external router, including defining physical routers and levels.
Guides on specifying physical connections between multiviewer inputs and external router outputs for interconnection.
Covers configuration of serial tally systems like Kalypso, Andromeda, and TSL serial devices.
Details how to set up a multiviewer to interface with a Ross Video production switcher.
Explains how to set up a multiviewer to interface with a Kahuna production switcher.
Guides on setting up a multiviewer to interface with Thomson Grass Valley Kayak switchers.
Details how to set up a multiviewer to interface with Grass Valley Kayenne video production switchers.
To Next Page
