227
Kaleido-X
User’s Manual
Configuring Audio Monitors
To configure an audio monitor
1In the Layouts tab, click the audio monitor you wish to configure.
2In the Properties pane, click the Audio scale box, under Appearance, and then select
the appropriate audio scale from the list.
3The Monitoring indicator check box is selected by default. Audio monitors with a
monitoring indicator show by their color that someone is listening to the same audio
level. There could be a distinctive color for each of the displays at the site, or one for
each room, etc., telling you in more or less details, where the audio is currently being
monitored. Clear the check box if you do not need this.
4Under Assignments, click the Audio format box, and then select the appropriate
format from the list: Auto, PCM, Dolby E or Dolby VANC.
Note: To decode Dolby E audio metadata, the Dolby E option (KXS-DolbyE)
is required.
See Enabling Options on page 411, for more information.
Note: See Configuring Audio Scales on page 229 for more information.
Monitoring indicator check box
To Next Page
Loading...
