Miranda Kaleido-X - Adding an Any-Source Multicast Transport Stream; To Add an Any-Source Multicast (ASM) Transport Stream

94
Managing Kaleido-X Systems
Configuring the System Representation
6 Repeat this procedure until you have added all required SSM/SFM transport streams to
your system configuration.
7On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Adding an Any-Source Multicast Transport Stream
To add an any-source multicast (ASM) transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then click the appropriate network adapter
element, for the stream you wish to add:
• NETWORK ADAPTER 2 for a high-bitrate stream;
•alternatively, NETWORK ADAPTER 3, 4, 5, or 6, for a high-bitrate stream, in the case
of a four-port or six-port Kaleido-IP model;
• optionally, NETWORK ADAPTER 1 for a low-bitrate stream.
The supported stream types (Multicast, Unicast) are listed in the Tools pane.
Note: Under the network adapter elements, transport streams are listed in
alphabetical order.
Transport stream
Program
Elementary stream (audio)
Elementary stream (video)
Group address
Protocol
Source IP address
Port number (or range)