Miranda Kaleido-X - Assigning an IP Address to Each Device in Your System

387
Kaleido-X
User’s Manual
Dashboard Messages
The following tables explain messages that may appear in the Status dashboard (lower right
corner) and in the Upgrade dashboard (lower left corner), on the Monitor wall. An “x” in the
7RU, 4RU, X16, or KMV column indicates that the message applies to a specific multiviewer
model, namely Kaleido-X (7RU), Kaleido-X (4RU), Kaleido-X16, or KMV-3901/3911.
Kaleido-X16 output options
Option Part No. Feature
Display 90-
Degree
Rotation
KXS-X16-Rotator-S Rotation license for Kaleido-X16-S
KXS-X16-Rotator-D Rotation license for Kaleido-X16-D
SDI
Monitoring
Output
KXS-X16-HDM-S HD-SDI monitoring output for Kaleido-X16-S
KXS-X16-HDM-D HD-SDI monitoring output for Kaleido-X16-D
3D
a
a.After enabling the 3D support option in XAdmin, refresh the current layout or load another one, for
the change to be reflected on the monitor wall.
KXS-X16-3DLA-S Stereoscopic display license (line alternate mode) for
Kaleido-X16-S
KXS-X16-3DLA-D Stereoscopic display license (line alternate mode) for
Kaleido-X16-D
Kaleido-X16 router options
Option Part No. Feature
SDI Router
Output
KXS-X16-RTR16x2 Dual router output option (1/frame)
Status dashboard messages
Message Description 7RU 4RU X16 KMV
PSU A absent PSU A is absent, overheating, has a DC circuitry
fault condition, or no current is drawn from it.
x
PSU B absent PSU A is absent, overheating, has a DC circuitry
fault condition, or no current is drawn from it.
x
PSU A 48 V This message indicates that either PSU A is
absent, overheating, has a DC circuitry fault
condition, or that no current is drawn from it.
x
PSU B 48 V PSU A is absent, overheating, has a DC circuitry
fault condition, or no current is drawn from it.
x
PSU A 48 V Fuse PSU A fuse is broken. x x
PSU B 48 V Fuse PSU B fuse is broken. x x
PSU A 12 V PSU A is absent, overheating, has a DC circuitry
fault condition, or no current is drawn from it.
x