230
Creating Layouts
Configuring Audio Scales
2 Select the audio scale you wish to customize (or the one on which you wish to base a
new audio scale), from the list at the bottom of the window.
3 Click one of the Top, Middle or Bottom Color buttons to set the top, middle and
bottom color.
The Choose Background Color window appears.
4 Click the appropriate color square.
Swatches in the selected color appear under Preview.
5Click OK to close the Choose Background Color window.
In Edit Audio Scale, the corresponding button and the corresponding part of the audio
monitor preview show the selected color.
6 Repeat the procedure until all three colors are set as desired.
7 Enter the audio thresholds in Upper limit and Lower limit.
8 Type a name for the new audio scale in the box at the bottom, and then click the Save
as button. Alternatively, if you are modifying an existing custom audio scale, you can
click the Save button.
Configuring an Audio Scale From a Specific Audio Monitor
To configure an audio scale from a specific audio monitor
1In the Layouts tab, click the audio monitor you wish to configure.
2In the Properties pane, click the Audio scale box, under Appearance, and then click
the button that appeared at the end of the box.
The Edit Audio Scale window appears.
Note: When you modify one of the default audio scales, you can only save
your changes as a new audio scale. On the other hand, custom audio scales
can be tweaked and saved repeatedly until the desired configuration is
achieved.
To Next Page
Loading...
