116
Calibrating the Kaleido-X
Multiviewer Output Calibrations
This has the same effect as selecting every output head one by one, and adjusting the
sliders to the same value for the selected parameter.
Calibrating the Color Saturation
Each of the output heads in the multiviewer can drive a monitor wall display. The image on
the monitor wall contains both graphical elements created by the Kaleido-X system, and
video signals that are passed through the system. It is often useful to be able to modify the
color saturation of the video so that its appearance within the graphical environment is
pleasing. The Color saturation calibration control provides this function.
The color saturation calibration does not affect the graphical elements within the monitor
wall display.
To calibrate the color saturation
1 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar.
A hierarchical list representing the current system appears.
2 In the list, expand the multiviewer whose output heads you wish to calibrate.
3 Expand the appropriate output module.
The expanded module will show the output heads. (Depending on the multiviewer
model, other items may also appear.)
Note: If you want to apply the same values to all the other output heads in
your system, you must click the Apply to all button for Green (master) FIRST,
and then the Apply to all buttons for blue and red in any order. Otherwise
the values for blue and red would be modified following the application of
the value for green.
Note: The Kaleido-IP and KMV-3901/3911 multiviewers do not support
color saturation calibration.
To Next Page
Loading...
