160
Logical Sources
Creating and Configuring Logical Sources
A new entry appears in the sources table, with all assignments based on the logical
source template (see
Defining Physical Assignments, on page 165).
4 On the File menu, click Save.
Removing Logical Sources for Removed Programs in a Transport Stream
To remove logical sources associated with programs that are not present anymore
1 Connect XEdit to the Kaleido-IP (see Using XEdit Online, on page 67) and then click the
Channels/Sources tab.
Logical sources associated with programs that have been removed from a transport
stream will have elements marked in red.
2 Select these sources (using the standard Shift+click or Ctrl+click keyboard shortcuts to
extend your selection as needed).
3 Right-click the selection, and then click Delete selected sources on the menu.
Note: Under Source info, dynamic and static names resulting from the
Name level assignments are limited to 48 characters and automatically
truncated as needed.
To Next Page
Loading...
Need help?
General
