117
Kaleido-X
User’s Manual
4 Select the head you wish to calibrate.
5Click the Properties tab.
The color saturation adjustment control appears. Expand the Calibration heading to
show the control if it is not visible.
6 Use the slider to adjust the color saturation until you obtain a pleasing presentation of
the video elements on the monitor wall display driven by the selected head.
Alternatively, type a value (between 0 and 100) directly in the Color saturation box.
7 If appropriate, you may copy the settings from this head to every output head in the
system. To apply the color saturation settings globally throughout your system, click
Apply to all.
This has the same effect as selecting every output head one by one, and adjusting the
Color saturation slider to the same value.
Calibrating the DVI Keying Mode
Kaleido-X and Kaleido-X16 multiviewers have a DVI input connector for every output head.
Using these connectors, it is possible to feed keying material to the multiviewer. Depending
Note: All videos on the monitor wall display controlled by the selected
head are adjusted simultaneously.
To Next Page
Loading...
Need help?
General
