121
Kaleido-X
User’s Manual
A hierarchical list representing the current system appears.
2 In the list, expand the multiviewer whose output heads you wish to calibrate.
3 Expand the appropriate output module.
The expanded module will show the output heads. (Depending on the multiviewer
model, other items may also appear.)
4 Select the head you wish to calibrate.
5In the Properties tab, click Audio Monitoring Color, and then click the button that
appears at the end of the line.
.
6In Pick a Color, click the tab that corresponds to the color space you wish to use, and
then choose the color that will be associated with the selected output head.
7Click OK to close the color picker window.
Multiviewer Input Calibrations
Calibrating Zero VU Reference Level for an Embedded Audio Source
Click to open the
color picker window
Note: This section does not apply to the Kaleido-IP.
To Next Page
Loading...
