286
Managing RCP Users
Setting RCP User Preferences
Assigning a Timer to an RCP User
To assign a timer to an RCP User
1 In the main window, click the RCP users tab, and then select the user to whom you
wish to assign a timer, from under the appropriate room in the rooms hierarchical list.
2In the Properties pane, click the Timer box, and then select the appropriate timer to be
controlled by this user in this room, from the list of available timers.
Note: This setting applies to the selected user, in the current room only. A
keyboard configuration must be selected for each user, in every room,
unless the system default is suitable.
To Next Page
Loading...
