Miranda Kaleido-X - Loading a Layout by Using the Kaleido-RCP2; Using Layouts Presets

35
Kaleido-X
User’s Manual
2 Select the layout you wish to load, from the set of layouts defined for this room, and
then click OK.
The new layout appears on the monitor wall.
Loading a Layout by Using the Kaleido-RCP2
To load a layout on the monitor wall, by using the Kaleido-RCP2
1 Press LOAD on the Kaleido-RCP2.
The layout chooser appears.
2 Select the layout you wish to load, from the set of layouts defined for this room, and
then click OK.
The new layout appears on the monitor wall.
Using Layouts Presets
To load a layout using the Kaleido-RCP2’s preset buttons
• Press the appropriate preset button (1-10) on the Kaleido-RCP2.
The layout associated with the preset button for the current user appears on the
monitor wall. See “Assigning Room Layouts to an RCP User’s Presets” on page 280 for
more details.