245
Kaleido-X
User’s Manual
4 Click the Blink mode box, and then select the appropriate blinking behavior, for your
purposes:
5 To enable the latched status indicators, select the Display alarm latch check box, click
the Latch colors box, and then select the appropriate color scheme for your purposes:
either Same as text colors, or Same as background colors.
6 Choose from two display modes: Cycle and Marquee.
In cycle mode, the alarm monitor displays text from each alarm, one after the other. In
marquee mode, the alarm text scrolls across the monitor. In addition, you can control
the cycling speed and the scroll rate by setting the cycling period, in milliseconds.
7 Make the appropriate assignments (see Assigning Logical Sources or Monitor Wall
Destinations to Monitors, on page 209), and select the desired alarm and text label
levels, if necessary.
8On the File menu, click Save.
Configuring Subtitling Monitors
To monitor subtitling from a DVB stream
1 To add a subtitling monitor, click the Subtitling monitor button ( ) on the toolbar,
click the layout, and then move or resize the monitor as needed.
Blink mode Description
Off The status indicator will never blink.
Follow latch The status indicator’s blinking will follow the latch status.
The indicator will blink until someone unlatches the alarm.
Critical The status indicator will blink when the current status is
critical.
Critical and major The status indicator will blink when the current status is
critical or major.
Critical, major and
minor
The status indicator will blink when the current status is
critical, major or minor.
Display alarm latch check box
Blink mode selection
Latch colors selection
100% video transparency to keep the status
indicator hidden when there is no alarm.
To Next Page
Loading...
