GUIDE TO INSTALLATION AND OPERATION
6 | SDM-874p
DVI
STD: Video levels are maintained from the SD/HD SDI input
to the DVI output.
EXPD: Video levels from the SD/HD SDI input (16 to 235 in 8
bits) are expanded to the full graphic range (0 to 255 in
8 bits) at the DVI output.
TC
On: If time code is detected on the input, it will be burned into
the output video. If no time code is detected, 00:00:00
will be displayed.
Off: The time code display in the output video will be
disabled.
GFX
1920x1200: Select 1920x1200 as the resolution of the graphic
display output (GFX 60p and GFX 50p). The input
video (SD, 720, 1080) will be mapped into this
image structure.
1280x768: Select 1280x768 as the resolution of the graphic
display output (GFX 60p and GFX 50p). The input
video (SD, 720) will be mapped into this image
structure.
.
4.2 Select Pushbutton functions:
The Select pushbutton cycles the operation of the SDM-874p
through its available operating modes. The current operating
mode is indicated by the six LEDs located to the right of the
pushbutton, as shown in Figure 4. The six named modes are
selected when their LED only is illuminated. Modes A, B and C
are selected when the pair of LEDs indicated are illuminated.
To Next Page
Loading...
Need help?
General
