GUIDE TO INSTALLATION AND OPERATION
SDM-874p | 3
3 Installation
3.1 Power Supply
The LKS-WSU power supply provides power to the SDM-874p
for 110 V and 220 V operation. The power supply is a regulated
+5 VDC@2.4 A power source. The SDM-874p employs a mini
XLR-3 connector for its power needs. Figure 3 shows a detailed
pinout of the male connector.
13
2
(male connector-facing)
Pin 1: Shield
Pin 2: GND
Pin 3: +5 VDC
Figure 3: Power connector pinout
To Next Page
Loading...