GUIDE TO INSTALLATION AND OPERATION
SDM-874p | 9
5 Specifications
INPUT
Signal: SMPTE 259M-C (270Mbps) and
SMPTE 292M (1.485, 1.485/1.001 Gbps)
with re-clocked loop-through output
Cable length: 100 m (Belden 1694A)
Return loss: >15 dB up to 1.5 GHz
Connector: 75W BNC
OUTPUT
Normal mode: DVI output compliant to EIA/CEA-861-B
GFX mode DVI output compliant to VESA DMT
Connector: DVI-I, Female, compliant to DVI 1.0 pin out
GENERAL
Quantization: 10 bits
Power voltage: 5VDC
Consumption: 4 W
Temperature
operating range: 0 – 30° C
To Next Page
Loading...