--
SETTING THE SHUTTER SPEED
------;------------------~
16
0
fl
1
~
To set the shutter speed, the shutter speed
dial
is
turned to the left or right until the
desired speed number lines up with the sh
utter
speed indicator. The dial rotates
in
either
direction.
• The marks "B, 1, 2 ....
1000"
indicate "Bulb,
1 sec.,
Y2
sec
.... l / 1000 sec." shutter speed
positions.
•
"B"
(bulb) is for long exposures with the
shu
tter
remaining open
as
long as the
button
is
depressed.
• The red
"X"
indicates
the
shutter speed for
synchronization with electronic flash.
• Shu tter speed can be freely changed before
or after winding.
• When turning the shutter speed dial, see that
it falls correctly
into
click-stop position.
If
set to intermediate positions,
the
shutter
will
not
operate
at
an accurate speed.
To Next Page
Loading...