--
SETTING THE FILM SPEED
------------------------
32
40
64
80
125
160
250
320
500
650
1000
1300
20
@D
The CdS
meter
of
the MIRANDA Sensomat
is
coupled
to
the
fIlm
speed dial. After loading
the fIlm, therefore, see
that
the film speed dial
is set- properly. Failure to adjust this dial
according
to
the
speed rating
of
the
film loaded
in the camera will prevent the meter from
giving correct exposure reading.
• Lift and
turn
the
knurled
outer
ring
of
the
shutter dial in either direction until the
desired figure comes directly opposite the
indicator.
•
It
is
unnecessary
to
re-adjust
the
film speed
dial unless film
of
a different speed rating is
loaded in
the
camera.
• The same film speed setting
is
employed
when using filters or in close-ups and
photo
-
micrography.
• Intermediate settings on the dial denote film
speeds given in
the
illustration.
To Next Page
Loading...