miRider GB3 - Maintenance and Storage; Regular Maintenance Checks

Maintenance and storage
1. Ensure the bike is stored in a secure, cool and dry place when not in use.
2. Do not use any chemical solvents to clean the bike, as this may corrode the surface.
3. rsrrfir
bike retailer and the below checks are followed.
20
Suggested regular maintenance checks:
Parts Maintenance checks
Brakes srrrsrsffi
stopping power before use.
Tyres Ensure the tyres have no damage, enough tread
rssrssffisr
rrssrsssr
Shock absorber Check the shock absorber is free moving with no
knocking noise.
Throttle Check the throttle deactivates when released and
moves freely.
Screws/bolts Check for any loose fastenings and tighten as required.
Wheels Check for signs of damage, wear and tear, and ensure
all nuts, bolts and spokes are tight.
Battery Ensure after a full charge the LCD screen shows the
battery indicator being full.
Charger Check that the red light appears when charging and
turns to green once fully charged.
Chain and
Sprocket
Clean regularly and apply bike chain lubricant.
Check chain isn’t too slack.
eBike cleaning Regularly clean the eBike with a clean, damp cloth.
Wires/cables Ensure there is no visible damage.