Folding the eBike frame To secure the eBike frame
Open the clamp to raise and lower the
handlebar height. Make sure the clamp is
closed fully before riding. Do not extend
higher than the grooved lines
4. Adjusting handlebar height
8
Instructions for use
1. 2.
On the lever opposite the folding hinge,
press down the red lever then pull the main
black handle outwards to release the frame
locking mechanism.
Connect the 2 halves of the frame together
and secure by pushing the black locking
sfir
click into its locked position.
Open the seat clamp, as shown in the
image above.
5. How to insert the seat
To Next Page
Loading...