Battery Indicator Lights - Lights flash in turn as the device
charges. The battery is fully charged when all the lights
illuminate and no longer flash.
Volume Controls - Increase/decrease the volume output of
the projector.
Mode Control - Press for auto focus and auto keystone
adjustments. Press and hold to turn ECO brightness
mode on or o.
Audio Out (3.5mm) - Optional) Connect an external
speaker or headphones.
USB-C Video Input - Connect the supplied USB-C video
cable to a device that supports USB-C video output.
HDMI Video Input - Connect an HDMI cable to a device
that supports HDMI video output.
USB Power Output - Connect a USB power cable to
provide power to a HDMI streaming stick or to charge a
smartphone battery. Cannot be used for video input.
USB-C Charge Input - Connect the supplied USB-C
charging cable and power adapter. Fully charge battery
before the first use (approx. 4-5 hours).
Auto Focus Sensor - IMPORTANT: Do not block sensor.
Keep sensor clean and free of debris.
Projection Lens
Reset Button - Press to reset projector.
Power Button - Press and hold for 3 seconds to power the
projector on or o. Briefly press to check battery life
on the projector. Battery life will be displayed by the
number of lit battery indicator lights.
A
B
C
D
E
F
G
H
I
J
K
L
To Next Page
Loading...
