16
trouBLeshooting
. Q The projected image is blurry.
. A Adjust the focus wheel on the projector to fine-tune the picture.
Also check that the surface you are projecting on is smooth.
. Q The projector is not projecting.
. A Here are several things to check if your projector is not projecting:
- If on battery power, try plugging the projector in with the Micro
USB cable.
- If plugged in with the Micro USB cable, check that the Micro
USB cable is securely plugged into both the USB power
source and the Micro USB port on the projector.
- Check that the HDMI cable is firmly plugged into the HDMI
port on the projector and your source device.
note: If you are also using an adapter to connect your
source device, check with your device manufacturer to ensure
you are using the proper adapter for an HDMI video out
connection.
- Check that you are using any necessary adapters with your
device. If an adapter is required, power down the projector,
add the adapter, and then turn the projector back on.
To Next Page
Loading...
