15
OPERATING THE PROJECTOR
seTup
1. The projector can be powered using the included AC adapter or the
built-in battery.
•To power the projector with AC power, connect the AC adapter to
the projector’s DC input and plug the other end into an outlet. Once
connected, the battery indicator lights will illuminate on the projector
showing the amount of battery power remaining.
•To power the projector with the built-in battery, simply turn the projector
on. To check the remaining battery life of the projector press the power
button briefly.
IMPORTANT: Fully charge the battery before first use (approx. 4-5 hours).
2. Connect the included HDMI cable to the HDMI port on the projector
and the other end to your device.
To Next Page
Loading...
