Mission mx1 User Manual

Read all instructions before installation. Avoid extreme settings, ensure correct wiring, and protect from environmental hazards.

Avoid full volume, use caution with tone controls, and prevent amplifier distortion to protect speakers.

Route cables safely to avoid tripping hazards and position speakers away from heat sources and potential damage.

Complete and return the warranty card within 8 days. Retain sales receipt as proof of purchase.

Return faulty units as a pair to the dealer. Contact Mission for service or technical queries.

Introduction to Mission MX Series loudspeakers and importance of reading manual for optimal performance.

Carefully unpack speakers and retain all packing materials for future transport or storage.

Fit spikes to MX-3, MX-4, MX-5, MX-6, MX300T models. Be cautious of sharp spikes during assembly.

Adjust spike height to ensure the loudspeaker is stable and level on the floor.

Properly strip and connect speaker cables to terminals, ensuring correct polarity for optimal sound.

Understand standard and bi-wired connections for improved performance, especially for front speakers.

Utilize separate amplifiers for LF and HF drivers to further enhance performance.

Optimal placement for sound quality, considering distance from walls and ear level.

Guidance on placing centre and surround speakers for accurate dialogue and immersive sound.

Check loudspeaker phase and use port bungs for fine-tuning bass response.

Diagrams showing recommended placement for front, centre, surround, and back speakers in a home theatre.

Illustration of wiring connections for a 5.1 surround sound system.

Guidance on setting speaker sizes ('Large' or 'Small') for AV processors for optimal bass management.

Adjust sound levels and compensate for distances for balanced audio output.

Instructions on how to sand-fill the bases of MX-3 and MX-4 for improved stability and bass response.

Tips on cleaning cabinets and grilles, and advice against removing grilles for optimal sound.

Detailed specifications for various Mission MX series models including drivers, impedance, and dimensions.