Mission m35i - User Manual

IAG House, Huntingdon
PE29 6XU
England
T: +44 (0) 1480 447700
F: +44 (0) 1480 431767
www.mission.co.uk
info@mission.co.uk
www.mission.co.uk
m 3i series
IAG is a trading name of IAG Commercial Macao Offshore Ltd. Dolby, Pro Logic & Dolby Digital are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of Digital Theater Systems Inc.
Dolby, Dolby Pro Logic & Dolby Digital sont des marques enregistrées de Dolby Licensing Corporation. DTS est une marque enregistrée de Digital Theater Systems Inc.
m3i manual 05-07-04.qxd 08/07/2004 09:45 Page ii

Summary

User Instructions

Cautions

Important safety instructions for installation and use to prevent damage or injury.

Warranty Conditions

Details on warranty terms, exclusions, and how to claim.

General Information

Key instructions to ensure superb performance and safe operation of the loudspeakers.

Unpacking Your Loudspeakers

Guidance on safely unpacking and preparing the loudspeakers for use.

Fitting Spikes

Instructions for attaching and adjusting the sharp spikes for speaker stability.

Connecting your Loudspeakers

Conventional Loudspeaker Connections

How to connect loudspeakers using standard speaker cables and terminal panels.

Power Handling

Warning about amplifier power output and potential speaker damage from distortion.

Bi-Wiring

Explanation of bi-wiring for improved performance and terminal connections.

Bi-Amping

Explanation of bi-amping for improved performance using separate amplifiers.

Positioning your Loudspeakers

The Mission m3 ci Centre Channel Speaker

Guidance on positioning the m3ci centre channel speaker for Home Cinema systems.

Attaching the Feet

Instructions for attaching the adhesive feet to the loudspeaker cabinets.

Connections and Phasing

How to connect the Centre Channel speaker and ensure correct phasing.

m3 as setup

Phase

How to check loudspeaker phase for optimal sound quality.

Setting up Audio Visual Loudspeakers

Advice on setting speaker levels for AV systems and achieving a balanced sound.

Optional Sand Filling

Instructions for filling m33i/m34i loudspeakers with sand to improve stability.

m3 dsi positioning

Sound Level

Importance of setting equal sound levels for all speakers in an AV setup.

Loudspeaker Maintenance

Product Service

Guidance on returning loudspeakers for servicing and where to find assistance.

Technical Specifications

Mission m35i Specifications