Why is there no sound coming from my Mission speakers?
If there's no sound from your Mission speakers, first ensure the system is switched on. Next, inspect the speaker cables for any shorts. Finally, verify that you've selected the correct audio source.
What to do if my Mission MV-2 Speakers have distorted or rattling sounds at high levels?
If your Mission speakers produce distorted or rattling sounds at high volumes, try these steps: First, lower the system volume. Then, remove any objects that may be resting on the speakers or subwoofer. Lastly, make sure there are no objects positioned too closely to the subwoofer that could be vibrating.
Why is the bass distorted at high levels on my Mission MV-2?
Excessive or distorted bass at high levels from your Mission speakers can occur if the system level is too high, so reduce the overall system level. Also, reduce the bass control. Finally, reposition the speakers away from corners, as proximity can amplify bass.
What to do if my Mission MV-2 Speakers are popping or thumping from the subwoofer?
If you're hearing popping or thumping noises from the subwoofer of your Mission speakers, the system level might be set too high, so lower it. Also, the subwoofer level may be too high, so reduce it. Finally, check and lower the LFE level.
Why does the sound from my Mission speakers lack bass content?
If your Mission speakers lack bass, check all system connections and rectify, as the front loudspeakers may be out of phase. Ensure the subwoofer is powered on. Check the subwoofer phase settings. Adjust the subwoofer crossover control.
What causes excessive bass distortion at low volumes on Mission MV-2 Speakers?
Excessive bass distortion at low volumes with your Mission speakers can be due to several factors. Try lowering the subwoofer level. Also, reduce the LFE level. Finally, check the subwoofer wiring and correct it if necessary.
Why is the television picture color distorted when using Mission MV-2 Speakers?
If the color on your television picture is distorted when using Mission speakers, switch off the system and TV. Move the units away from each other. Wait 15 minutes, and then switch them back on.
How to fix indistinct sound and poor localization on Mission speakers?
To fix indistinct sound and poor localization of effects or dialogue with your Mission speakers, check all system connections and rectify them, as one or more loudspeakers might be out of phase.
Key safety precautions for using the product.
Detailed technical data for each speaker model.
Common issues encountered and their potential causes.
Instructions on how to wire speakers for stereo playback.
Initial steps for installing and connecting the subwoofer.
Connecting the subwoofer via an AV processor's line or LFE output.
To Next Page
General
