Mission m3i Series User Manual

IAG House, Huntingdon
PE29 6XU
England
T: +44 (0) 1480 447700
F: +44 (0) 1480 431767
www.mission.co.uk
info@mission.co.uk
www.mission.co.uk
m 3i series
IAG is a trading name of IAG Commercial Macao Offshore Ltd. Dolby, Pro Logic & Dolby Digital are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of Digital Theater Systems Inc.
Dolby, Dolby Pro Logic & Dolby Digital sont des marques enregistrées de Dolby Licensing Corporation. DTS est une marque enregistrée de Digital Theater Systems Inc.
m3i manual 05-07-04.qxd 08/07/2004 09:45 Page ii

Mission m3i Series Specifications

General

Brand	Mission
Model	m3i Series
Category	Speakers
Language	English

Summary

User Instructions

Cautions

Important safety instructions and precautions for using the loudspeakers, including cleaning and electrical safety.

Warranty Conditions

Details regarding the warranty terms, registration, and exclusions for the purchased equipment.

Welcome to Mission

Introduction to the Mission m3i series loudspeakers and their advanced features.

General Information

General advice and warnings for installing and operating the loudspeakers.

Unpacking Your Loudspeakers

Instructions for carefully unpacking and preparing the loudspeakers for use.

Fitting Spikes

Guidance on how to attach spikes to the loudspeaker base for stability and placement.

Connecting your Loudspeakers

Conventional Loudspeaker Connections

Step-by-step guide for connecting loudspeaker cables to terminals.

Terminal Panels

Explanation of the terminal panel layout for speaker connections.

Power Handling

Warning and advice on amplifier power output to prevent speaker damage.

Bi-Wiring

Instructions for bi-wiring loudspeakers to enhance audio performance.

Bi-Amping

Explanation of bi-amping using separate amplifiers for improved performance.

Positioning your Loudspeakers

The Mission m3ci Centre Channel Speaker

Placement guidelines for the m3ci centre channel speaker in home cinema setups.

Attaching the Feet

Instructions for attaching feet or spikes to the loudspeaker cabinets.

Connections and Phasing

Guidance on connecting the centre channel speaker and ensuring correct phasing.

Phase

Instructions for checking and setting the phase of loudspeakers for optimal sound.

Setting up Audio Visual Loudspeakers

Advice on setting sound levels for centre, front, and rear speakers in AV systems.

Optional Sand Filling

Guidance on filling m33i/m34i loudspeakers with sand for stability.

m3as setup

Subwoofer Connections

Instructions for connecting the m3as subwoofer to hi-fi or AV amplifiers.

Crossover and Volume Controls

Guidance on setting the crossover frequency and volume for optimal bass blending.

AV Amplifier Settings

Recommendations for setting AV amplifier speaker configurations for the subwoofer.

Phase Adjustment

Instructions for adjusting the subwoofer phase control for better blend with speakers.

m3dsi positioning

Wall Mounting

Instructions for wall mounting the m3dsi speakers at the recommended height.

Logo Placement

Guidance on applying Mission logos when speakers are inverted for ceiling mounting.

Loudspeaker Maintenance

Cleaning Cabinets

Advice on cleaning loudspeaker cabinets and grilles.

Product Service

Instructions for returning loudspeakers for service or repair.

Technical Specifications

m30i to m35i Series Specifications

Detailed technical specifications for the m30i, m31i, m32i, m33i, m34i, and m35i models.

m3c1i, m3c2i, m3dsi, m3as Specifications

Detailed technical specifications for the m3c1i, m3c2i, m3dsi, and m3as models.