Mission m30i User Manual

IAG House, Huntingdon
PE29 6XU
England
T: +44 (0) 1480 447700
F: +44 (0) 1480 431767
www.mission.co.uk
info@mission.co.uk
www.mission.co.uk
m 3i series
IAG is a trading name of IAG Commercial Macao Offshore Ltd. Dolby, Pro Logic & Dolby Digital are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of Digital Theater Systems Inc.
Dolby, Dolby Pro Logic & Dolby Digital sont des marques enregistrées de Dolby Licensing Corporation. DTS est une marque enregistrée de Digital Theater Systems Inc.
m3i manual 05-07-04.qxd 08/07/2004 09:45 Page ii

Mission m30i Specifications

General

Configuration	2-way
Impedance	8 Ohms
Recommended Amplifier Power	25 - 100W
Power Handling	100W
Tweeter	25mm (1")

Summary

General Cautions and Safety

Cautions

Essential safety instructions for installation and usage, including electrical safety and environmental considerations.

Warranty Conditions

Details regarding warranty registration, terms, and exclusions for the purchased equipment.

User Instructions

Fitting Spikes

Guidance on fitting spikes to the loudspeaker base, including safety warnings about sharp points.

Connecting Loudspeakers

Conventional Loudspeaker Connections

Details on preparing and connecting loudspeaker cables, ensuring correct polarity for optimal sound.

Power Handling Warning

Warning regarding amplifier power limits and potential damage to speakers from distortion or overheating.

Bi-Wiring

Bi-Amping

Speaker Positioning and Setup

Positioning Your Loudspeakers

Guidance on optimal placement of loudspeakers for best sonic performance and stereo imaging.

Connections and Phasing

Maintenance and Specifications

Technical Specifications

Detailed technical data for the Mission m3i series loudspeakers, including dimensions and performance metrics.