Mistral MAS101 - Service and Maintenance

Service and Maintenance
WARNING
Before you clean the air conditioner, be sure to
disconnect the power supply plug.
Cleaning the indoor unit and the remote
controller
CAUTIONS
• Use a dry cloth to wipe the indoor unit and
remote controller.
• A dampened cloth with cold water may be used
on the indoor unit if it is very dirty.
• Never use a damp cloth on the remote
controller.
• Do not use chemically-treated dusters for
cleaning or leave such materials on the unit for a
long period of time, this it may damage or fade
the surface of the unit.
• Do not use benzine, thinners, polishing powder,
or similar solvents for cleaning. These may
cause the plastic surface to crack or deform.
If you do not plan to use the unit for at least 1
month.
1. Operate the fan only for about half a day to dry
the inside of the unit out.
2. Stop the air conditioner and disconnect power.
3. Remove the batteries from the remote
controller.
Check before operation
CAUTIONS
• Check that the wiring is not broken
and is
connected.
• Check that the air fi lter is installed.
• Check that the outdoor unit air outlet or inlet is
not blocked.
Before you clean the air conditioner, be sure to
disconnect the power supply plug.
9