Page 15 © Mitchell & Johnson UK 2013 SAP201V IB Ver 1.0 Rev 0.0
Connecting the Power Cable
- Before connecting the power cord, connect all the other components.
- Make sure the power switch is turned off on the unit before plugging or unplugging the power cable.
- Connect the supplied power cord to the unit's AC INLET.
Caution
- Never plug the power cord into the outlet before connecting it to the unit.
- If the power cord is plugged in, connecting or disconnecting it to/from the unit could cause electric shock.
- Plug the power cord into a household power outlet.
To Next Page
Loading...