Welcome
6
Applications Card CPU2-S
syd-0620/1.1 – R4.0 – 01.2016
Conformity
Mitel Schweiz AG hereby declares that
• the MiVoice Office 400 products conform to the basic requirements and
other relevant stipulations of Directive 1999/5/EC.
• all our products are manufactured in conformity with RoHS (2011/65/EU).
The product-specific declarations of conformity can be found on the Mitel doc-
ument portal.
Trademarks
Mitel® is a registered trademark of Mitel Networks Corporation.
All other trademarks, product names and logos are trademarks or registered
trademarks of their respective proprietors.
The trademarks, service marks, logos and graphics (summarised under the
term "trademarks") listed on Mitel websites or in Mitel publications are regis-
tered and unregistered trademarks of Mitel Networks Corporation (MNC) or its
subsidiaries (summarised under the term “Mitel”) and others. It is forbidden to
use the trademarks without Mitel's prior express approval. For more informa-
tion, please contact our legal department at legal@mitel.com. A list of globally
registered trademarks of Mitel Networks Corporation is available on this web-
site: http://www.mitel.com/trademarks.
Usage of third party software
MiVoice Office 400 products comprise, or are partially based on, third-party
software products. The licence information for these third-party products is
listed in the user's guide of the MiVoice Office 400 product in question.
Exclusion of Liability
(Not valid for Australia. See section "Limited Warranty (Australia only)", page
10 on the limited warranty in Australia.)
All parts and components of the MiVoice Office 400 communication solution
are manufactured in accordance with ISO 9001 quality guidelines. The rele-
vant user information has been compiled with the utmost care. The functions
of the MiVoice Office 400 products have been tested and approved after com-
prehensive conformity tests. Nonetheless errors cannot be entirely excluded.
The manufacturers shall not be liable for any direct or indirect damage that
may be caused by incorrect handling, improper use, or any other faulty behav-
To Next Page
Loading...
Need help?
General
