Need help?Do you have a question about the Mitel 6910 and is the answer not in the manual?
General| Programmable Keys | 8 programmable keys |
|---|---|
| Protocols | SIP |
| Supported Codecs | G.711, G.729, G.722 |
| Ethernet Ports | 2 x 10/100 Ethernet ports |
| Power over Ethernet (PoE) | Yes (IEEE 802.3af) |
| Audio | Full-duplex speakerphone |
| Weight | 800g |
Details the physical keys on the 6910 IP phone and their functions.
Explains the function of each key on the phone's key panel.
Describes the function of each digit and symbol on the phone's keypad.
Explains support for the international telephone numbering plan.
Instructions on how to dial a phone number using various methods.
How to use the speakerphone for calls and adjust audio modes.
Instructions for connecting and using a headset with the phone.
Accessing and using the Redial List for outgoing calls.
Steps to answer incoming calls via handset, speakerphone, or headset.
How to redirect an incoming call to another number or key.
How to send an incoming call directly to voicemail.
How to put an active call on hold and retrieve it.
Procedures for blind, consultative, and direct call transfers.
Creating local and centralized conference calls.
How to end an active call or conference.
Managing contacts, adding, editing, and searching directories.
Accessing and managing lists of missed, incoming, and outgoing calls.
Accessing voicemail and configuring message waiting indicators.
Configuring Do Not Disturb settings and modes.
Configuring Call Forward settings and modes.
Enabling DTMF digit display during dialing.
Enabling/disabling the call waiting tone.
Enabling/disabling stuttered dial tone for message waiting.
Enabling/disabling audible beeps for XML applications.
Setting delay for scrolling status messages.
Phone behavior for incoming calls during active calls.
Reminder tone for active calls with held calls.
Reminder tone for single calls on hold.
Setting the duration of the call waiting tone.
Configuring preferred line and timeout settings.
Canceling incoming calls using the Goodbye key.
Configuring the MWI LED for voicemail.
Handling incoming intercom calls.
Configuring group paging using RTP.
Setting up shared call appearance for multiple phones.
Features for managing executive/assistant calls.
Troubleshooting steps for a blank phone display.
Troubleshooting steps for lacking a dial tone.
Troubleshooting steps when the phone does not ring.
Troubleshooting handset operational issues.
Steps to locate the phone's IP address.
Troubleshooting the "No Service" message on the phone.
Procedures for restarting the IP phone.
Steps to lock the phone for security.
Details warranty limitations and exclusions.
Information on how to obtain warranty repair services.
Details on repair services available after the warranty period.
Notice regarding user-generated data during repairs in Australia.
Warranty exclusions specific to Australia.
Details on warranty repair services in Australia.
To Next Page
