67
LINE KEYS AND PROGRAMMABLE KEYS PARK/PICKUP KEYS
• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the
call.
Administrators can configure the Park and Pickup keys for any line using the configuration files or the
Mitel Web UI.
CONFIGURING PARK/PICKUP KEYS
MITEL WEB UI
1. Click on Operation > Programmable Keys.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Park.
NOTE: The Value field should be configured by the Administrator.
4. Select from Key 1 through Key 8.
5. In the Type field, select Pickup.
NOTE: The Value field should be configured by the Administrator.
6. Click Save Settings.
7. Click on Reset, then click Restart to restart the IP phone and apply the changes.
USING THE PARK CALL/PICKUP PARKED CALL FEATURE
Use the following procedure on the IP phone to park a call and pick up a parked call.
Parking a Call
1. While on a live call, press the Park key.
2. Perform the following for your specific server:
To Next Page
Loading...
